Ubuntu8.10 + Mac Mini + Panasonic PT-AX200E

For questions concerning driver development in general, problems with the board or users, feature requests or other Off-Topic discussions.

Ubuntu8.10 + Mac Mini + Panasonic PT-AX200E

Postby maymann » Sun Feb 22, 2009 7:10 pm

Hi forum,

I'm setting up a ubuntu mythtv (Mythbuntu8.10) on a Mac Mini with a Panasonic PT-AX200E projector.
I have read viewtopic.php?f=1&t=493&p=3485&hilit=ax200#p3485 but was not able to make it work :-(

Are anyone able to help please :cry: ?

---

Here is my /etc/X11/xorg.conf:
# This file was file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen1" 0 0
# Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/local/lib/X11/fonts/ghostscript/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/local/lib/X11/fonts/mscorefonts/"
EndSection

Section "Module"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Panasonic AX-200"
# HorizSync 28.0 - 68.0
# VertRefresh 24.0 - 61.0
Modeline "1280x720_60" 74.30 1280 1312 1592 1624 720 735 742 757 +hsync +vsync
EndSection

Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "PanelOff" # [<bool>]
#Option "DDCMode" # [<bool>]
Option "MonitorLayout" "None,CRT" # [<str>]
#Option "IgnoreEDID" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "VideoKey" # <i>
#Option "MergedFB" "on" # [<bool>]
#Option "CRT2HSync" # [<str>]
#Option "CRT2VRefresh" # [<str>]
#Option "CRT2Position" "Clone"# [<str>]
#Option "MetaModes" # [<str>]
#Option "MergedDPI" # [<str>]
#Option "NoMergedXinerama" # [<bool>]
#Option "MergedXineramaCRT2IsScreen0" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" "1280x1024" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
Option "iBookHacks" "on"# [<bool>]
Identifier "Card0"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "Unknown Board"
BusID "PCI:0:16:0"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
DefaultDepth 24
EndSection

#Section "Screen"
# Identifier "Screen0"
# Device "Videocard0"
# Monitor "Monitor0"
# DefaultDepth 24
# Option "TwinView" "0"
# Option "metamodes" "DFP-1: nvidia-auto-select +0+0"
#EndSection

Section "Screen"
Identifier "Screen1"
Device "Videocard1"
Monitor "Monitor0"
Option "TwinView" "0"
Option "metamodes" "DFP-0: 1280x720_60 +0+0"
EndSection

---

Here is my /var/log/Xorg.0.log:
X.Org X Server 1.5.2
Release Date: 10 October 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-19-server i686 Ubuntu
Current Operating System: Linux front1 2.6.27-7-generic #1 SMP Fri Oct 24 06:42:44 UTC 2008 i686
Build Date: 24 October 2008 08:00:16AM
xorg-server 2:1.5.2-2ubuntu3 (buildd@rothera.buildd)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 22 17:53:00 2009
(==) Using config file: "/etc/X11/xorg.conf"
Parse error on line 24 of section Files in file /etc/X11/xorg.conf
"RgbPath" is not a valid keyword in this section.
(EE) Problem parsing the config file
(EE) Error parsing the config file

Fatal server error:
no screens found
(WW) xf86CloseConsole: KDSETMODE failed: Bad file descriptor
(WW) xf86CloseConsole: VT_GETMODE failed: Bad file descriptor
(WW) xf86OpenConsole: VT_GETSTATE failed: Bad file descriptor

---

Here is my dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.27-7-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC 2008 (Ubuntu 2.6.27-7.14-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ede00 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003e0d5000 (usable)
[ 0.000000] BIOS-e820: 000000003e0d5000 - 000000003e2d6000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003e2d6000 - 000000003eebf000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003eebf000 - 000000003eeef000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003eeef000 - 000000003ef00000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ef00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] last_pfn = 0x3e0d5 max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000
[ 0.000000] RAMDISK: 377b4000 - 37fef54c
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 APPLE )
[ 0.000000] ACPI: XSDT 3EEFD120, 0074 (r1 APPLE Apple00 55 1000013)
[ 0.000000] ACPI: FACP 3EEFB000, 00F4 (r3 APPLE Apple00 55 Loki 5F)
[ 0.000000] ACPI: DSDT 3EEF1000, 389A (r1 APPLE Macmini 10001 INTL 20050309)
[ 0.000000] ACPI: FACS 3EEC1000, 0040
[ 0.000000] ACPI: HPET 3EEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: APIC 3EEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: MCFG 3EEF8000, 003C (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: ASF! 3EEF7000, 009C (r32 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: SBST 3EEF6000, 0030 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: ECDT 3EEF5000, 0053 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: SSDT 3EEBD000, 064F (r1 APPLE SataPri 1000 INTL 20050309)
[ 0.000000] ACPI: SSDT 3EEBC000, 069C (r1 APPLE SataSec 1000 INTL 20050309)
[ 0.000000] ACPI: SSDT 3EEF0000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309)
[ 0.000000] ACPI: DMI detected: Apple
[ 0.000000] 96MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 38000000
[ 0.000000] low ram: 00000000 - 38000000
[ 0.000000] bootmap 00008000 - 0000f000
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00005c0a20] TEXT DATA BSS ==> [0000100000 - 00005c0a20]
[ 0.000000] #4 [00377b4000 - 0037fef54c] RAMDISK ==> [00377b4000 - 0037fef54c]
[ 0.000000] #5 [00005c1000 - 00005c4000] INIT_PG_TABLE ==> [00005c1000 - 00005c4000]
[ 0.000000] #6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00038000
[ 0.000000] HighMem 0x00038000 -> 0x0003e0d5
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003e0d5
[ 0.000000] On node 0 totalpages: 254068
[ 0.000000] free_area_init_node: node 0, pgdat c048a500, node_mem_map c1000000
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 223300 pages, LIFO batch:31
[ 0.000000] HighMem zone: 24571 pages, LIFO batch:3
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ee000
[ 0.000000] PM: Registered nosave memory: 00000000000ee000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 251834
[ 0.000000] Kernel command line: root=UUID=4ea769df-a2ea-4c2b-87b1-6061a3416b69 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PMTIMER calibration value
[ 0.000000] Detected 1833.292 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 992736k/1016660k available (2572k kernel code, 23204k reserved, 1160k data, 424k init, 99156k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc04ab000 - 0xc0515000 ( 424 kB)
[ 0.004000] .data : 0xc038329a - 0xc04a5680 (1160 kB)
[ 0.004000] .text : 0xc0100000 - 0xc038329a (2572 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3666.58 BogoMIPS (lpj=7333168)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using mwait in idle threads.
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.018362] ACPI: Core revision 20080609
[ 0.019809] ACPI: Checking initramfs for custom DSDT
[ 0.416278] ENABLING IO-APIC IRQs
[ 0.416480] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.456312] CPU0: Intel Genuine Intel(R) CPU 1400 @ 1.83GHz stepping 08
[ 0.460028] Booting processor 1/1 ip 6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3666.63 BogoMIPS (lpj=7333268)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.544551] CPU1: Intel Genuine Intel(R) CPU 1400 @ 1.83GHz stepping 08
[ 0.544573] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.548054] Brought up 2 CPUs
[ 0.548058] Total of 2 processors activated (7333.21 BogoMIPS).
[ 0.548084] CPU0 attaching sched-domain:
[ 0.548087] domain 0: span 0-1 level MC
[ 0.548092] groups: 0 1
[ 0.548099] CPU1 attaching sched-domain:
[ 0.548101] domain 0: span 0-1 level MC
[ 0.548104] groups: 1 0
[ 0.548197] net_namespace: 840 bytes
[ 0.548197] Booting paravirtualized kernel on bare hardware
[ 0.548331] Time: 17:08:23 Date: 02/22/09
[ 0.548371] NET: Registered protocol family 16
[ 0.548393] EISA bus registered
[ 0.548393] ACPI: bus type pci registered
[ 0.548393] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.548393] PCI: MCFG area at e0000000 reserved in E820
[ 0.548393] PCI: Using MMCONFIG for extended config space
[ 0.548393] PCI: Using configuration type 1 for base access
[ 0.548860] ACPI: EC: EC description table is found, configuring boot EC
[ 0.553653] ACPI: BIOS _OSI(Linux) query ignored via DMI
[ 0.556253] ACPI: Interpreter enabled
[ 0.556257] ACPI: (supports S0 S3 S4 S5)
[ 0.556274] ACPI: Using IOAPIC for interrupt routing
[ 0.560480] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.560480] ACPI: EC: driver started in poll mode
[ 0.560480] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.560480] PCI: 0000:00:02.0 reg 10 32bit mmio: [90380000, 903fffff]
[ 0.560480] PCI: 0000:00:02.0 reg 14 io port: [20f0, 20f7]
[ 0.560480] PCI: 0000:00:02.0 reg 18 32bit mmio: [80000000, 8fffffff]
[ 0.560480] PCI: 0000:00:02.0 reg 1c 32bit mmio: [90400000, 9043ffff]
[ 0.560480] PCI: 0000:00:07.0 reg 10 32bit mmio: [90444000, 90444fff]
[ 0.560480] PCI: 0000:00:1b.0 reg 10 64bit mmio: [90440000, 90443fff]
[ 0.560480] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.560480] pci 0000:00:1b.0: PME# disabled
[ 0.560480] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.560480] pci 0000:00:1c.0: PME# disabled
[ 0.560480] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.560480] pci 0000:00:1c.1: PME# disabled
[ 0.560516] PCI: 0000:00:1d.0 reg 20 io port: [20a0, 20bf]
[ 0.560578] PCI: 0000:00:1d.1 reg 20 io port: [2080, 209f]
[ 0.560640] PCI: 0000:00:1d.2 reg 20 io port: [2060, 207f]
[ 0.560702] PCI: 0000:00:1d.3 reg 20 io port: [2040, 205f]
[ 0.560768] PCI: 0000:00:1d.7 reg 10 32bit mmio: [90445400, 904457ff]
[ 0.560824] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.560830] pci 0000:00:1d.7: PME# disabled
[ 0.560987] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.560992] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.561022] PCI: 0000:00:1f.1 reg 10 io port: [20e8, 20ef]
[ 0.561030] PCI: 0000:00:1f.1 reg 14 io port: [2104, 2107]
[ 0.561038] PCI: 0000:00:1f.1 reg 18 io port: [20e0, 20e7]
[ 0.561047] PCI: 0000:00:1f.1 reg 1c io port: [2100, 2103]
[ 0.561055] PCI: 0000:00:1f.1 reg 20 io port: [20c0, 20cf]
[ 0.561111] PCI: 0000:00:1f.2 reg 10 io port: [20d8, 20df]
[ 0.561119] PCI: 0000:00:1f.2 reg 14 io port: [20fc, 20ff]
[ 0.561127] PCI: 0000:00:1f.2 reg 18 io port: [20d0, 20d7]
[ 0.561136] PCI: 0000:00:1f.2 reg 1c io port: [20f8, 20fb]
[ 0.561144] PCI: 0000:00:1f.2 reg 20 io port: [2020, 202f]
[ 0.561153] PCI: 0000:00:1f.2 reg 24 32bit mmio: [90445000, 904453ff]
[ 0.561178] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.561183] pci 0000:00:1f.2: PME# disabled
[ 0.561240] PCI: 0000:00:1f.3 reg 20 io port: [efa0, efbf]
[ 0.561349] PCI: 0000:01:00.0 reg 10 64bit mmio: [90200000, 90203fff]
[ 0.561360] PCI: 0000:01:00.0 reg 18 io port: [1000, 10ff]
[ 0.561396] PCI: 0000:01:00.0 reg 30 32bit mmio: [fffe0000, ffffffff]
[ 0.561423] pci 0000:01:00.0: supports D1
[ 0.561425] pci 0000:01:00.0: supports D2
[ 0.561427] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.561434] pci 0000:01:00.0: PME# disabled
[ 0.561485] PCI: bridge 0000:00:1c.0 io port: [1000, 1fff]
[ 0.561491] PCI: bridge 0000:00:1c.0 32bit mmio: [90200000, 902fffff]
[ 0.561569] PCI: 0000:02:00.0 reg 10 64bit mmio: [90100000, 9010ffff]
[ 0.564119] PCI: bridge 0000:00:1c.1 32bit mmio: [90100000, 901fffff]
[ 0.564175] PCI: 0000:03:03.0 reg 10 32bit mmio: [90000000, 90000fff]
[ 0.564231] pci 0000:03:03.0: supports D1
[ 0.564233] pci 0000:03:03.0: supports D2
[ 0.564236] pci 0000:03:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.564242] pci 0000:03:03.0: PME# disabled
[ 0.564295] pci 0000:00:1e.0: transparent bridge
[ 0.564303] PCI: bridge 0000:00:1e.0 32bit mmio: [90000000, 900fffff]
[ 0.564331] bus 00 -> node 0
[ 0.564339] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.564773] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.564935] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.565110] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.572458] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.572458] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.572458] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.572512] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.572632] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.572756] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.572878] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.573002] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.573074] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.573074] pnp: PnP ACPI init
[ 0.573074] ACPI: bus type pnp registered
[ 0.576250] pnp 00:08: io resource (0x1640-0x164f) overlaps 0000:00:1c.0 BAR 7 (0x1000-0x1fff), disabling
[ 0.576250] pnp: PnP ACPI: found 10 devices
[ 0.576250] ACPI: ACPI bus type pnp unregistered
[ 0.576250] PnPBIOS: Disabled by ACPI PNP
[ 0.576250] PCI: Using ACPI for IRQ routing
[ 0.584042] NET: Registered protocol family 8
[ 0.584045] NET: Registered protocol family 20
[ 0.584063] NetLabel: Initializing
[ 0.584063] NetLabel: domain hash size = 128
[ 0.584063] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.584075] NetLabel: unlabeled traffic allowed by default
[ 0.584085] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.584090] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.585697] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.585700] actual entries 65620
[ 0.585794] AppArmor: AppArmor Filesystem Enabled
[ 0.585823] ACPI: RTC can wake from S4
[ 0.588043] Switched to high resolution mode on CPU 0
[ 0.588596] Switched to high resolution mode on CPU 1
[ 0.592025] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 0.592029] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 0.592033] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 0.592036] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 0.592040] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[ 0.592044] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.592054] system 00:06: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.592063] system 00:08: ioport range 0x680-0x6ef has been reserved
[ 0.592067] system 00:08: ioport range 0x800-0x80f has been reserved
[ 0.592070] system 00:08: ioport range 0x810-0x817 has been reserved
[ 0.592074] system 00:08: ioport range 0x400-0x47f has been reserved
[ 0.592077] system 00:08: ioport range 0x500-0x53f has been reserved
[ 0.627403] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 0.627407] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 0.627414] pci 0000:00:1c.0: MEM window: 0x90200000-0x902fffff
[ 0.627420] pci 0000:00:1c.0: PREFETCH window: 0x00000050000000-0x000000500fffff
[ 0.627429] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.627432] pci 0000:00:1c.1: IO window: disabled
[ 0.627439] pci 0000:00:1c.1: MEM window: 0x90100000-0x901fffff
[ 0.627444] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.627453] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.627455] pci 0000:00:1e.0: IO window: disabled
[ 0.627462] pci 0000:00:1e.0: MEM window: 0x90000000-0x900fffff
[ 0.627467] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.627488] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.627494] pci 0000:00:1c.0: setting latency timer to 64
[ 0.627505] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.627511] pci 0000:00:1c.1: setting latency timer to 64
[ 0.627604] pci 0000:00:1e.0: power state changed by ACPI to D0
[ 0.627611] pci 0000:00:1e.0: setting latency timer to 64
[ 0.627616] bus: 00 index 0 io port: [0, ffff]
[ 0.627619] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.627622] bus: 01 index 0 io port: [1000, 1fff]
[ 0.627624] bus: 01 index 1 mmio: [90200000, 902fffff]
[ 0.627627] bus: 01 index 2 mmio: [50000000, 500fffff]
[ 0.627629] bus: 01 index 3 mmio: [0, 0]
[ 0.627632] bus: 02 index 0 mmio: [0, 0]
[ 0.627634] bus: 02 index 1 mmio: [90100000, 901fffff]
[ 0.627637] bus: 02 index 2 mmio: [0, 0]
[ 0.627639] bus: 02 index 3 mmio: [0, 0]
[ 0.627642] bus: 03 index 0 mmio: [0, 0]
[ 0.627644] bus: 03 index 1 mmio: [90000000, 900fffff]
[ 0.627647] bus: 03 index 2 mmio: [0, 0]
[ 0.627649] bus: 03 index 3 io port: [0, ffff]
[ 0.627652] bus: 03 index 4 mmio: [0, ffffffff]
[ 0.627662] NET: Registered protocol family 2
[ 0.640057] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.640321] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.641447] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.642005] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.642009] TCP reno registered
[ 0.648088] NET: Registered protocol family 1
[ 0.648216] checking if image is initramfs... it is
[ 1.457115] Freeing initrd memory: 8429k freed
[ 1.458508] audit: initializing netlink socket (disabled)
[ 1.458539] type=2000 audit(1235322503.457:1): initialized
[ 1.465344] highmem bounce pool size: 64 pages
[ 1.465351] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.468320] VFS: Disk quotas dquot_6.5.1
[ 1.468428] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.468557] msgmni has been set to 1762
[ 1.468699] io scheduler noop registered
[ 1.468702] io scheduler anticipatory registered
[ 1.468705] io scheduler deadline registered
[ 1.468719] io scheduler cfq registered (default)
[ 1.468734] pci 0000:00:02.0: Boot video device
[ 1.469071] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.469121] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.469173] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.469223] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.469269] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 1.469386] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 1.469434] pcieport-driver 0000:00:1c.1: found MSI capability
[ 1.469482] pci_express 0000:00:1c.1:pcie00: allocate port service
[ 1.469528] pci_express 0000:00:1c.1:pcie02: allocate port service
[ 1.469580] pci_express 0000:00:1c.1:pcie03: allocate port service
[ 1.469963] isapnp: Scanning for PnP cards...
[ 1.823760] isapnp: No Plug & Play device found
[ 1.865648] hpet_resources: 0xfed00000 is busy
[ 1.865724] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.868387] brd: module loaded
[ 1.868467] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.868664] PNP: No PS/2 controller found. Probing ports directly.
[ 1.869542] i8042.c: No controller found.
[ 1.877134] mice: PS/2 mouse device common for all mice
[ 1.877293] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[ 1.877327] rtc0: alarms up to one month, y3k, hpet irqs
[ 1.877478] EISA: Probing bus 0 at eisa.0
[ 1.877487] Cannot allocate resource for EISA slot 1
[ 1.877490] Cannot allocate resource for EISA slot 2
[ 1.877518] EISA: Detected 0 cards.
[ 1.877521] cpuidle: using governor ladder
[ 1.877524] cpuidle: using governor menu
[ 1.878094] TCP cubic registered
[ 1.878122] Using IPI No-Shortcut mode
[ 1.878337] registered taskstats version 1
[ 1.878453] Magic number: 13:495:138
[ 1.878459] block ram3: hash matches
[ 1.878573] rtc_cmos 00:09: setting system clock to 2009-02-22 17:08:24 UTC (1235322504)
[ 1.878577] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.878579] EDD information not available.
[ 1.878833] Freeing unused kernel memory: 424k freed
[ 1.878885] Write protecting the kernel text: 2576k
[ 1.878917] Write protecting the kernel read-only data: 936k
[ 1.940612] compcache: Compressed swap size set to: 250480 KB
[ 1.940941] TLSF: pool: f882e000, init_size=16384, max_size=0, grow_size=16384
[ 2.014485] Program usplash tried to access /dev/mem between 0->fb0000.
[ 2.035837] fuse init (API version 7.9)
[ 2.096573] ACPI: SSDT 3EEBAC90, 022A (r1 APPLE Cpu0Ist 3000 INTL 20050309)
[ 2.096939] ACPI: SSDT 3EEB9E10, 01BA (r1 APPLE Cpu0Cst 3001 INTL 20050309)
[ 2.097289] Monitor-Mwait will be used to enter C-1 state
[ 2.097293] Monitor-Mwait will be used to enter C-2 state
[ 2.097474] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 2.097540] processor ACPI0007:00: registered as cooling_device0
[ 2.097546] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.097948] ACPI: SSDT 3EEBAF10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309)
[ 2.098291] ACPI: SSDT 3EEB8F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309)
[ 2.100004] Marking TSC unstable due to TSC halts in idle
[ 2.104221] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 2.104289] processor ACPI0007:01: registered as cooling_device1
[ 2.104298] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 2.305452] sky2 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.305471] sky2 0000:01:00.0: setting latency timer to 64
[ 2.305506] sky2 0000:01:00.0: v1.22 addr 0x90200000 irq 16 Yukon-2 EC rev 2
[ 2.306260] sky2 eth0: addr 00:16:cb:a8:a6:2a
[ 2.461692] usbcore: registered new interface driver usbfs
[ 2.461720] usbcore: registered new interface driver hub
[ 2.464066] usbcore: registered new device driver usb
[ 2.476469] USB Universal Host Controller Interface driver v3.0
[ 2.476530] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 2.476542] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.476546] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.476596] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 2.476635] uhci_hcd 0000:00:1d.0: irq 21, io base 0x000020a0
[ 2.476839] usb usb1: configuration #1 chosen from 1 choice
[ 2.476870] hub 1-0:1.0: USB hub found
[ 2.476879] hub 1-0:1.0: 2 ports detected
[ 2.515254] No dock devices found.
[ 2.562604] SCSI subsystem initialized
[ 2.580538] Adding 250476k swap on /dev/ramzswap0. Priority:100 extents:1 across:250476k
[ 2.595644] libata version 3.00 loaded.
[ 2.684458] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.684472] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.684477] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.684507] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 2.684547] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002080
[ 2.684662] usb usb2: configuration #1 chosen from 1 choice
[ 2.684694] hub 2-0:1.0: USB hub found
[ 2.684702] hub 2-0:1.0: 2 ports detected
[ 2.788410] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.788424] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.788428] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.788463] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 2.788507] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002060
[ 2.788618] usb usb3: configuration #1 chosen from 1 choice
[ 2.788652] hub 3-0:1.0: USB hub found
[ 2.788659] hub 3-0:1.0: 2 ports detected
[ 2.797034] usb 1-1: new low speed USB device using uhci_hcd and address 2
[ 2.892496] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 2.892507] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.892512] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.892543] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 2.892584] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002040
[ 2.892690] usb usb4: configuration #1 chosen from 1 choice
[ 2.892732] hub 4-0:1.0: USB hub found
[ 2.892739] hub 4-0:1.0: 2 ports detected
[ 2.985851] usb 1-1: configuration #1 chosen from 1 choice
[ 3.100644] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 3.100658] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.100662] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.100691] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 3.104604] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.104612] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.104622] ehci_hcd 0000:00:1d.7: irq 21, io mem 0x90445400
[ 3.216053] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 3.228043] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.228242] usb usb5: configuration #1 chosen from 1 choice
[ 3.228276] hub 5-0:1.0: USB hub found
[ 3.228285] hub 5-0:1.0: 8 ports detected
[ 3.284086] hub 4-0:1.0: unable to enumerate USB device on port 1
[ 3.416062] usbcore: registered new interface driver hiddev
[ 3.416087] usb 1-1: USB disconnect, address 2
[ 3.440524] ata_piix 0000:00:1f.1: version 2.12
[ 3.440602] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 3.440612] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.440658] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 3.440763] scsi0 : ata_piix
[ 3.448069] scsi1 : ata_piix
[ 3.448708] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x20c0 irq 14
[ 3.448712] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x20c8 irq 15
[ 3.608637] ata1.00: ATAPI: MATSHITADVD-R UJ-85J, FEW7, max UDMA/66
[ 3.624614] ata1.00: configured for UDMA/66
[ 3.792925] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-85J FEW7 PQ: 0 ANSI: 5
[ 3.793155] ata_piix 0000:00:1f.2: enabling device (0005 -> 0007)
[ 3.793167] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.793176] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[ 3.820131] usbcore: registered new interface driver usbhid
[ 3.820139] usbhid: v2.6:USB HID core driver
[ 3.948086] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 3.948244] scsi2 : ata_piix
[ 3.948638] scsi3 : ata_piix
[ 3.949883] ata3: SATA max UDMA/133 cmd 0x20d8 ctl 0x20fc bmdma 0x2020 irq 19
[ 3.949887] ata4: SATA max UDMA/133 cmd 0x20d0 ctl 0x20f8 bmdma 0x2028 irq 19
[ 4.060052] usb 1-1: new low speed USB device using uhci_hcd and address 3
[ 4.121643] ata3.01: ATA-7: Hitachi HTS541616J9SA00, SB4AC7CP, max UDMA/133
[ 4.121650] ata3.01: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.136614] ata3.01: configured for UDMA/133
[ 4.250259] usb 1-1: configuration #1 chosen from 1 choice
[ 4.273283] input: ruwido austria GmbH ruwido austria GmbH USB Infrared Keyboard V2.07 as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input1
[ 4.283253] input,hidraw0: USB HID v1.10 Keyboard [ruwido austria GmbH ruwido austria GmbH USB Infrared Keyboard V2.07] on usb-0000:00:1d.0-1
[ 4.303601] scsi 2:0:1:0: Direct-Access ATA Hitachi HTS54161 SB4A PQ: 0 ANSI: 5
[ 4.303747] ohci1394 0000:03:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 4.318106] input: ruwido austria GmbH ruwido austria GmbH USB Infrared Keyboard V2.07 as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.1/input/input2
[ 4.355491] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[90000000-900007ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 4.388220] input,hidraw1: USB HID v1.10 Mouse [ruwido austria GmbH ruwido austria GmbH USB Infrared Keyboard V2.07] on usb-0000:00:1d.0-1
[ 4.392717] scsi 0:0:0:0: Attached scsi generic sg0 type 5
[ 4.392762] scsi 2:0:1:0: Attached scsi generic sg1 type 0
[ 4.419469] Driver 'sd' needs updating - please use bus_type methods
[ 4.419614] sd 2:0:1:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 4.419643] sd 2:0:1:0: [sda] Write Protect is off
[ 4.419646] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 4.419694] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.419798] sd 2:0:1:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 4.419824] sd 2:0:1:0: [sda] Write Protect is off
[ 4.419827] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 4.419876] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.419881] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 4.427484] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 4.427491] Uniform CD-ROM driver Revision: 3.20
[ 4.427652] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 4.446340] sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 4.518565] sd 2:0:1:0: [sda] Attached SCSI disk
[ 4.640056] usb 4-1: new full speed USB device using uhci_hcd and address 3
[ 4.790352] PM: Starting manual resume from disk
[ 4.790357] PM: Resume from partition 8:6
[ 4.790359] PM: Checking hibernation image.
[ 4.790563] PM: Resume from disk failed.
[ 4.831934] usb 4-1: configuration #1 chosen from 1 choice
[ 4.848596] kjournald starting. Commit interval 5 seconds
[ 4.848622] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.853292] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.0/input/input3
[ 4.863432] input,hidraw2: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
[ 4.877193] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.1/input/input4
[ 4.877297] input,hidraw3: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
[ 5.116050] usb 4-2: new full speed USB device using uhci_hcd and address 4
[ 5.298889] usb 4-2: configuration #1 chosen from 1 choice
[ 5.307873] hiddev96hidraw4: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.3-2
[ 5.636445] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0019e3fffe13ddf6]
[ 7.976220] udevd version 124 started
[ 8.500557] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 8.657388] intel_rng: FWH not detected
[ 8.723771] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 8.776405] Linux agpgart interface v0.103
[ 8.828735] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.902821] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 8.925044] ACPI: Power Button (FF) [PWRF]
[ 8.925139] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input7
[ 8.957034] ACPI: Power Button (CM) [PWRB]
[ 9.042389] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 9.042935] agpgart-intel 0000:00:00.0: detected 16124K stolen memory
[ 9.057971] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[ 9.128651] iTCO_vendor_support: vendor-support=0
[ 9.184990] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 9.185105] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460)
[ 9.185260] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.253422] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input8
[ 9.281040] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 9.454357] tpm_inf_pnp 00:03: Found TPM with ID IFX0101
[ 9.462062] ath_hal: module license 'Proprietary' taints kernel.
[ 9.473996] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[ 9.488350] wlan: 0.9.4
[ 9.529313] ath_pci: 0.9.4
[ 9.529364] ath_pci 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 9.529378] ath_pci 0000:02:00.0: setting latency timer to 64
[ 10.064391] usbcore: registered new interface driver appleir
[ 10.064397] appleir: v1.1:USB Apple MacMini IR Receiver driver
[ 10.144129] ath_rate_sample: 1.2 (0.9.4)
[ 10.144707] wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 10.144718] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 10.144724] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 10.144737] wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 10.144745] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[ 10.144751] wifi0: mac 10.3 phy 6.1 radio 10.2
[ 10.144756] wifi0: Use hw queue 1 for WME_AC_BE traffic
[ 10.144759] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 10.144761] wifi0: Use hw queue 2 for WME_AC_VI traffic
[ 10.144764] wifi0: Use hw queue 3 for WME_AC_VO traffic
[ 10.144767] wifi0: Use hw queue 8 for CAB traffic
[ 10.144769] wifi0: Use hw queue 9 for beacons
[ 10.204229] wifi0: Atheros 5424/2424: mem=0x90100000, irq=17
[ 10.503258] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 10.503298] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 10.534505] hda_codec: STAC922x, Apple subsys_id=106b0800
[ 11.726666] lp: driver loaded but no devices found
[ 12.083198] Adding 281096k swap on /dev/sda6. Priority:-1 extents:1 across:281096k
[ 12.569826] EXT3 FS on sda5, internal journal
[ 13.094552] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
[ 13.096068] SGI XFS Quota Management subsystem
[ 13.134911] XFS mounting filesystem sda7
[ 13.383724] Ending clean XFS mount for filesystem: sda7
[ 14.306901] type=1505 audit(1235322516.766:2): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=3965
[ 14.307130] type=1505 audit(1235322516.766:3): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=3965
[ 14.537131] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.628547] sky2 eth0: enabling interface
[ 15.565532] NET: Registered protocol family 10
[ 15.566161] lo: Disabled Privacy Extensions
[ 15.566809] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.660562] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[ 16.306739] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 16.306990] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 17.087776] ACPI: WMI: Mapper loaded
[ 18.489310] ppdev: user-space parallel port driver
[ 20.487204] Bluetooth: Core ver 2.13
[ 20.487914] NET: Registered protocol family 31
[ 20.487921] Bluetooth: HCI device and connection manager initialized
[ 20.487925] Bluetooth: HCI socket layer initialized
[ 20.564838] Bluetooth: L2CAP ver 2.11
[ 20.564847] Bluetooth: L2CAP socket layer initialized
[ 20.622008] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.622015] Bluetooth: BNEP filters: protocol multicast
[ 20.648687] Bridge firewalling registered
[ 20.648840] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 20.667240] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84
[ 20.709759] Bluetooth: SCO (Voice Link) ver 0.6
[ 20.709767] Bluetooth: SCO socket layer initialized
[ 20.718089] Bluetooth: RFCOMM socket layer initialized
[ 20.718106] Bluetooth: RFCOMM TTY layer initialized
[ 20.718113] Bluetooth: RFCOMM ver 1.10
[ 20.944111] usb 4-1: USB disconnect, address 3
[ 21.224070] usb 4-1: new full speed USB device using uhci_hcd and address 5
[ 21.422860] usb 4-1: configuration #1 chosen from 1 choice
[ 21.513158] Bluetooth: Generic Bluetooth USB driver ver 0.3
[ 21.513687] usbcore: registered new interface driver btusb
[ 25.074064] NET: Registered protocol family 17
[ 26.460032] eth0: no IPv6 routers present
[ 35.932043] ath0: no IPv6 routers present
maymann
Private
Private
 
Posts: 1
Joined: Sun Feb 22, 2009 6:46 pm

Return to General questions

Who is online

Users browsing this forum: No registered users and 4 guests

cron